CN616P-Power with TRIAC Power Output of up to 2.4 Kilo Watt - Six Zone Thermocouple PID Programmable Temperature Controller - Output Profiles / Ramp and Soak / Autotune / Alarm - A/C

The CN616P-Power with TRIAC Power Output of up to 2.4 Kilo Watt - Six Zone Thermocouple PID Programmable Temperature Controller - Output Profiles / Ramp and Soak / Autotune / Alarm - A/C is a formidable addition to the CN616 line of Programmable PID Controls.

Not only can the CN616P-Power Control Six Zones of Output controlling mechanical relays or solid state relays(SSR's)  to control Your process, but it can Control some of Your processes Directly Without the need to wire additional mechanical or solid state relays.  The CN616P-Power uses TRIACs to provide a maximum Power Output of  2.4 Kilo Watt Output at 240 Volts or 1.2 Kilo Watt Output at 120 Volts controlled by the six zones.

Your CN616P-Power can be setup right out of the box and wired directly to your process without the expense of additional components like relays if it stays within the power limits of the specification.  Set up the configuration for: Active Zones, Degrees C/F, Thermocouple Type, Alarms, Setpoints, (each zone can independently be set for PID or ON/OFF control, Heating or Cooling).

The PID and ON/OFF settings can be manually configured to Your System or Process OR the PID settings can be set by an internal Autotune function.

You can Program Each Zone to follow a Profile containing Twenty segments for each zone controlling Setpoint Temperature, Time, or Ramp using the included software or manually from the Panel. 

 

The CN616P can be used to control small heaters, cooling fans, fluid pumps, mechanical power relays, solenoids directly without the use of External Relays as well as in countless other applications.  Try it somewhere new today.

 

 

 


Leave a comment

Please note, comments must be approved before they are published